Electrochemical performance of a nano SnO2-modified LiNi1/3Co1/3Mn1/3O2 cathode material

The nano SnO₂-modified LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by a carrier transfer method. The pristine and modified samples were characterized with various techniques such as XRD, SEM, XPS and EDS. The results showed that the SnO₂ particles did not enter the crystal structure of LiNi1/3Co1/ 3Mn1/3O₂, many nano SnO₂ particles were uniformly covered on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ and the modified thin layer could inhibit the dissolution of transition metal oxides. The electrochemical tests indicated that the existence of nano SnO₂ could improve the discharge capacity and rate capability owing to the decreased interfacial polarization. The cycling stability was remarkably improved at room temperature and 55 ℃. The XRD patterns of the fresh NCM electrode and after 50 cycles proved that the structural change of NCM was not so effective on the capacity fade.     

The selectivity of triethylene glycol modified glassy carbon electrode for charged and uncharged pieces

A triethylene glycol modified glassy carbon electrode(TEG–GCE) was fabricated by a controlledpotential electrolysis procedure. The performance of the film on the modified electrode surface was investigated by cyclic voltammetry with different probes. It was firstly found that while neutral pieces could penetrate the TEG film on the GCE surface, the ionic pieces, whatever it is anion or cation, was blocked by the film. This property was successfully used for determining dopamine(DA) in the presence of ascorbic acid(AA) with differential pulse voltammetry(DPV).     

Micelle‐Triggered β‐Hairpin to α‐Helix Transition in a 14‐Residue Peptide from a Choline‐Binding Repeat of the Pneumococcal Autolysin LytA

Choline‐binding modules (CBMs) have a ββ‐solenoid structure composed of choline‐binding repeats (CBR), which consist of a β‐hairpin followed by a short linker. To find minimal peptides that are able to maintain the CBR native structure and to evaluate their remaining choline‐binding ability, we have analysed the third β‐hairpin of the CBM from the pneumococcal LytA autolysin. Circular dichroism and NMR data reveal that this peptide forms a highly stable native‐like β‐hairpin both in aqueous solution and in the presence of trifluoroethanol, but, strikingly, the peptide structure is a stable amphipathic α‐helix in both zwitterionic (dodecylphosphocholine) and anionic (sodium dodecylsulfate) detergent micelles, as well as in small unilamellar vesicles. This β‐hairpin to α‐helix conversion is reversible. Given that the β‐hairpin and α‐helix differ greatly in the distribution of hydrophobic and hydrophilic side chains, we propose that the amphipathicity is a requirement for a peptide structure to interact and to be stable in micelles or lipid vesicles. To our knowledge, this “chameleonic” behaviour is the only described case of a micelle‐induced structural transition between two ordered peptide structures.     

聚苯胺共价修饰的氧化石墨烯的合成及其光限幅性能

利用酰胺化反应将聚苯胺(PANI)共价接枝到氧化石墨烯(GO)的表面,得到的杂化材料GO-PANI能很好地分散在常见的有机溶剂中。样品的XPS谱和红外光谱数据证实了在GO和PANI之间存在酰胺键。在316nm激光激发下,PANI和GO-PANI分别在420nm和416nm处显示出很强的荧光峰。GO-PANI的最大发射峰相对于PANI的发射峰蓝移了4nm,且荧光强度增强。开孔Z-扫描实验结果表明:与PANI相比,GO和PANI的共价键合使材料在532nm激光辐照下表现出更大的非线性消光系数和三阶非线性极化率虚部值,光限幅性能明显增强。     

Structure and Mechanism of an Aspartimide‐Dependent Peptide Ligase in Human Legumain

Peptide ligases expand the repertoire of genetically encoded protein architectures by synthesizing new peptide bonds, energetically driven by ATP or NTPs. Here, we report the discovery of a genuine ligase activity in human legumain (AEP) which has important roles in immunity and tumor progression that were believed to be due to its established cysteine protease activity. Defying dogma, the ligase reaction is independent of the catalytic cysteine but exploits an endogenous energy reservoir that results from the conversion of a conserved aspartate to a metastable aspartimide. Legumain’s dual protease–ligase activities are pH‐ and thus localization controlled, dominating at acidic and neutral pH, respectively. Their relevance includes reversible on–off switching of cystatin inhibitors and enzyme (in)activation, and may affect the generation of three‐dimensional MHC epitopes. The aspartate–aspartimide (succinimide) pair represents a new paradigm of coupling endergonic reactions in ATP‐scarce environments.     

Design and Synthesis of High‐Affinity Dimeric Inhibitors Targeting the Interactions between Gephyrin and Inhibitory Neurotransmitter Receptors

Gephyrin is the central scaffolding protein for inhibitory neurotransmitter receptors in the brain. Here we describe the development of dimeric peptides that inhibit the interaction between gephyrin and these receptors, a process which is fundamental to numerous synaptic functions and diseases of the brain. We first identified receptor‐derived minimal gephyrin‐binding peptides that displayed exclusive binding towards native gephyrin from brain lysates. We then designed and synthesized a series of dimeric ligands, which led to a remarkable 1220‐fold enhancement of the gephyrin affinity (K_D=6.8 nM ). In X‐ray crystal structures we visualized the simultaneous dimer‐to‐dimer binding in atomic detail, revealing compound‐specific binding modes. Thus, we defined the molecular basis of the affinity‐enhancing effect of multivalent gephyrin inhibitors and provide conceptually novel compounds with therapeutic potential, which will allow further elucidation of the gephyrin–receptor interplay.     

Influence of the Solvent on the “Casting” Methodology for MWCNT‐Modified Glassy Carbon and Platinum Electrodes

The choice of electrode material and surface preparation method are usually dictated by the suitability of the electrode to observe an electrochemical parameter, such as heterogeneous electron transfer rate, surface coverage, or redox potential. Thus, the glassy carbon (GC) and platinum (Pt) electrodes were modified with multiwalled carbon nanotubes (MWCNT) by direct “casting” modification using nine different aliquots of solvents. After drying at room temperature, the modified electrode showed distinct redox peaks corresponding to ferrocyanide oxidation/reduction. Using chemometrics, the cyclic voltammograms with higher current intensity were obtained for those in which ethanol, water and acetone as dispersing agents were used for GCE and dimethylformamide, water and acetone for Pt electrode modification.     

Preparation and properties of modified bismaleimide resins by novel bismaleimide containing 1,3,4‐oxadiazole

Bismaleimide (BMI) resin is a high‐performance thermosetting polymer, but its inherent brittleness hinder a broader range of application. Therefore, it has aroused wide concern to improve the toughness of BMI resins without scarification of their thermal stability. This paper reported some studies on modified BMI resins based on diallyl bisphenol A, novel BMI monomers, e.g. 2‐[3‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐oxadiazole (m‐Mioxd) or 2‐[4‐(4‐maleimidophenoxy)phenyl]‐5‐(4‐maleimidophenyl)‐1,3,4‐ oxadiazole (p‐Mioxd) in different proportions (0.87:1, 1:1, 1.2:1; mol/mol). The curing mechanism and kinetics of the copolymerized systems were investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy. Thermogravimetric analysis was applied to study the thermal properties of the cured resins, and the results indicated that the modified resins had excellent thermal stability with high residual weight percentage at 700°C (>50%), temperatures for 5% weight loss around 400°C. Besides, N,N′‐4,4′‐bismaleimidodiphenylmethylene and O,O′‐diallyl bisphenol A resin blends were modified by m‐Mioxd and p‐Mioxd, respectively. We investigated the effects of mole concentration of m‐Mioxd or p‐Mioxd on the curing process, mechanical properties, fracture toughness, and heat resistance of the modified resins. The results revealed that the introduction of m‐Mioxd and p‐Mioxd could improve the impact property of the modified BMI resins. When their proportion was 0.07, the impact strength increased 123.8% and 108.3%, respectively. The novel chain‐extended BMIs could reduce the crosslink density of cured resins and improve the brittleness effectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface Modification of Polypropylene by Ethylene Plasma and Its Induced β-Form in Polypropylene

This study aims to investigate the chemical structure and morphology of plasmapolymers produced by deposition of ethylene on the surface of polypropylene. The deposition films(sediments) of ethylene plasma on the surface of polypropylene are nonuniform, and the characterization results indicate the existence of hydroxyl groups and aldehyde(or ketone) groups in the sediments. The sediment of ethylene plasma on the polypropylene surface could induce the growth of β-form crystals in the surface layer of polypropylene.     

新烟碱类杀虫剂生物活性的理论研究和结构修饰*

在B3LYP/6-311G基组水平下,运用密度泛函理论(DFT)的量子化学方法,对20种重氮乙烷新烟碱类杀虫剂分子的电子结构特征进行了研究,获得了它们的前线轨道能(EHOMO、ENHOMO、ELUMO、ENLUMO等)、原子电荷(Qi)、摩尔熵(Sm)、偶极矩(μ)等量化参数与物理性质。经最佳变量子集回归研究发现,重氮乙烷新烟碱类杀虫剂分子对果蝇n AChRs、哺乳动物α4β2亚型的亲和力常数(p KD、p KA)分别与ELUMO、QW、QF、QN等参数具有良好的线性关系。逐一或逐四剔除交互验证以及VIF、tα/2检验,所建2个QSAR模型具有良好的稳健性及预测能力。根据2个QSAR模型推断了重氮乙烷新烟碱类分子可能的杀虫机理。进一步研究发现,在重氮乙烷新烟碱类分子的吡啶环上的合适部位,选用不含复键的吸电子能力较强的取代基团对其进行结构修饰,有利于提高修饰后分子的生物活性。基于分子17,设计出4种经结构修饰后对果蝇n AChRs亲和力显著提高的重氮乙烷新烟碱类分子(分别是分子27,28,30和31),希望能得到实验的证实。